Heavy Duty Cold Oil Press Machine, 3-5 kg
- Check whether the squeeze boring is loose prior to power connection.
- Refer the following table to adjust the temperature and then press the "RUN" key.
- After the machine operated, please first add a small amount of materials (about 8 Gm), and then add materials at one time after the slang squeezed out.
- Materials shall not be over baked and must retain a certain amount of moisture (about 6%). baked materials are better to be poured into a hopper while it is still warm.
- Bigger Material shall be sliced into groundnut sized particles to squeeze.
- When machine is working possess, metal hard objects are forbidden to be dived into the hopper to stir materials if the cutting stock or slag is irregular. bamboo chopsticks are advised to stir slightly.
- The product is an intelligent oil expeller with overthinking and overloading protection. it will be shut down automatically.
- High Temperature Glove
- Power Cable
- Cup for Holding Slag.
- Cleaning Brush
- Oil Cup + Filter Tank,
- Socket Wrench.
No reviews found